WG100 Wine Cellar Cooling Unit 50Hz
The WG100 is a fully ductable wine cellar cooling system for medium to large residential and commercial applications.
The WG100 is a 50Hz system, which is standard in the majority of Europe, Asia, Africa, Australia, & New Zealand. Unit capacity is up to 2.0kW.
The WG100 is a fully ductable wine cellar cooling system for medium to large residential and commercial applications. For help determining if the WG100 wine cellar cooling system is ideal for your cellar, use our product calculator tool. Contractor installation is recommended. The maximum capacity is 2,060 watts. The WG100 model is available in a water-cooled configuration.
[The WG100 is a 50Hz system, which is standard in the majority of Europe, Asia, Africa, & Australia; if you need a comparable 60Hz system (used in most of North and South America) see the D088 wine cellar cooling unit. Verify your country’s line frequency.]
Options and accessories for our 1-ton ducted model appear below. The remote sensor allows the owner to monitor temperature and humidity at up to three (3) different locations in the cellar, perfect for large cellars or for multiple rooms being cooled by one Wine Guardian unit.
1.31 – 2.059 kW
24 – 128 m³
|Where to Buy||
Documents and Resources
- Ducted Datasheet
- Ducted Quick Start Installation Guide (Multi-Language)
- Ducted Specifications Sheet
- Ducted Warranty
- Ducted Manual (English)
This product has no standard options.
All Wine Temperatures Bundle
For extended wine-cellar temperature ranges. Allows a Wine Guardian unit to control to an extended temperature range from 45°F(7° C) to 64°F(18° C), perfect for single to multiple cabinet applications and small wine rooms in which serving-temperature
cooling is preferred.
This bundle also contains an integral electric heater coil and controls to protect wine cellars from dangerously low temperatures. It is ideal for areas where ambient temperatures fall below 50°F/10°C.
Extreme Climate Protection Bundle
For Self-Contained Ducted systems: Contains an integral compressor crankcase heater and controls to protect the the system against low temperatures (required when intel air to the condenser coil is below 40°F/5°C). The bundle also contains an integral high capacity condenser fan and coil for operation at elevated ambient temperatures. This bundle be considered when inlet air to the condenser coil is above 100°F/38°C (condenser air inlet cannot exceed 120°F/49°C).
For Ducted Split systems: Unit protection in extreme climate conditions (on the condenser section only). It is required for continuous operation in climates that fall below 20°F. Enables the system to operate in temperatures as low as -20°F.
Contains all the features in the All Wine Temperatures Bundle and the Extreme Climate Protection Bundle.
Includes a factory-configured integral water-cooled condensing coil and water-regulating valve. This wine cellar cooling system is ideal for geothermal, cooling tower and lake water applications. The unit does not require warm condenser air connections, making it an excellent solution when warm-condenser-air venting is not possible.
Humidifiers help ensure perfect long-term wine storage conditions by adding humidity back into your wine space. The Integrated Humidifier attaches directly to your Wine Guardian cooling system using the same power source and remote controller.