WG25H Through the Wall Wine Cellar Cooling Unit with Heater


WG25H through-the-wall wine conditioning unit with a heater best suited for rooms or large cabinets up to 35 m3 with limited glass and very good insulation.

The WG25H is a 50Hz system, which is standard in the majority of Europe, Asia, Africa, Australia & New Zealand. Unit capacity is 0.21 – 0.41 kW. Uses the standard USA Type B plug.

Select Plug: None

Available only to those who purchase a Wine Guardian Through-the-Wall Cooling Unit. All platinum warranties include the compressor, evaporator coil and condenser coil.



This through-the-wall wine conditioning unit with heater is ideal for smaller residential wine cellars. WG25H cooling units are best suited for rooms or large cabinets from 20 m3 to 35 m3 with limited glass and very good insulation. The WG25H is easy to install and can be installed without the support of a contractor. The max capacity of the WG25H unit is 0.41 Kilowatts.

The Wine Guardian heater option acts to warm the air entering the wine cellar in order to maintain a constant set point.
The electric heat option includes the following:
-500-watt integral heater
-Thermal overload protection device and controls

The Wine Guardian through-the-wall unit with heater will either cool or heat the air, but it is not designed to do both at the same time. The Wine Guardian electric heat option must be specified at time of order and is installed at our factory prior to shipment.

If your wine cellar features one or more glass walls and you are close to the maximum recommended BTU/h, consider purchasing the WG40H with heater. Always run complete heat load calculations before purchasing a wine cellar air conditioning unit.

US Patent No. D634760 S
Canada Patent No. 135465
Mexico Reg. No. 33191

Additional information



Line Frequency

50 Hz


0.22 – 0.455 kW


3 – 34 m³


63.5 cm


36.2 cm


40.3 cm


28 kg



Where to Buy


Plug Type

Plug Type F, Plug Type G, Plug Type I, Plug Type J

Standard Options


Protects wine cellars from dangerously low temperatures. Adjustable activation from 2 - 6°F (-17 - -14°C) below your setpoint.

Available Options

This product has no optional features.