Ducted Wine Cellar Cooling Systems

Products Features/Specifications Resources

Versatile and self-contained, our ducted wine cooling systems offer maximum flexibility in design and installation. They also provide cooling for any sized area, whether you are storing in a residential, restaurant or commercial wine cellar.

With ducted wine conditioning systems, a grille on the inside wall is connected by insulated flexible ductwork to a self-contained unit outside the wine cellar that contains the evaporator, fans, compressor, condenser and controls. This system can be placed in any indoor location outside the cellar resulting in a quiet cellar with no obtrusive equipment taking up valuable racking space. Ducted wine room systems are ideal for larger private or commercial wine cellars. Available in water-cooled configurations.

Water-Cooled Configurations

Wine Guardian’s water-cooled units are ideal for geothermal, cooling tower and lake water applications and offer unique control and operating features not found on competitor’s systems. Also, no warm condenser air connections are required so it could be a good solution when warm condenser air venting is an issue. Completely self-contained through-the-wall or remote remote systems provide optimal temperature and humidity control for the preservation and enjoyment of your wine investment. Available in four capacities producing between 3,000 BTU to 15, 200 BTU, net output (870 to 3712 watts).

Ducted and ducted split systems and integrated humidifiers are sold and supported through an international distribution network. Contact one of Wine Guardian’s authorized distributors for assistance.

Download Datasheet

Find a Distributor
Your Shopping Cart
Your cart is empty.

Standard Features

  • Multiple supply air openings for installation flexibility
  • Removable control panel for easy access
  • Remote user interface control system
  • One supply and one return duct collars
  • Lightweight, corrosion-resistant, all aluminum outer body
  • High static pressure fans for extended lengths of ductwork
  • All aluminum evaporator and condenser coils for superior corrosion resistance.
  • Completely self-contained design
  • Factory tested prior to shipment
  • Certified by ETL to UL, Canadian, CE and other international safety standards
  • Made in the USA
  • Warranted to two years (parts) and one year (labor)
  • Factory service hotline support

Climate Control Capabilities

Remote Interface Controller (standard)

  • Combination temperature and humidity controller with single-stage cooling, heating and humidifier control
  • Can be mounted within or outside the wine cellar
  • When mounted outside the wine cellar, a remote sensor kit is required
  • Includes 50 feet (8 meters) of communications cable

SYSTEM SPECIFICATIONS*

View all system specification PDFs »

MODEL CAPACITY* LENGTH WIDTH HEIGHT ELECTRICAL WEIGHT
D025 3,760 BTU/H 33″ 14″ 14″ 115v/1ph/60Hz 80 lbs.
D050 6,320 BTU/H 33″ 22″ 14″ 115v/1ph/60Hz 125 lbs.
D088 9,600 BTU/H 33″ 22″ 14″ 230v/1ph/60Hz 130 lbs.
D200 15,680 BTU/H 50″ 22″ 18″ 230v/1ph/60Hz 200 lbs.
MODEL CAPACITY* LENGTH WIDTH HEIGHT ELECTRICAL WEIGHT
WG40 880 Watts 83.8 cm 35.6 cm 35.6 cm 220 – 240v / single-phase / 50Hz 36 kg.
WG75 1,570 Watts 83.8 cm 55.9 cm 35.6 cm 220 – 240v / single-phase / 50Hz 56 kg.
WG100 2,290 Watts 83.8 cm 55.9 cm 35.6 cm 220 – 240v / single-phase / 50Hz 59 kg.
WG175 3,812 Watts 127 cm 55.9 cm 45.7 cm 220 – 240v / single-phase / 50Hz 91 kg.

*Sizing note: Many variables affect proper unit sizing, including type of construction, insulation values, amount of glass, residential vs.commercial applications,etc. Proper unit size should only be determined by using the Wine Guardian sizing calculator. Check with your Wine Guardian authorized distributor for more information. Not all systems may offer all the features described above. For instance, humidity can only be controlled if the unit is equipped with a humidifier.