Wine Guardian Support

How to adjust humidity setpoint

NOTE: Setting #6: “Add or remove a humidifier” must be set to 1 or 2 in order to change the humidity set point.

  1. Press and release the UP arrow key. On the left side of the screen the temperature set point number will start blinking.
  1. Press the mode button once and the Humidity set point number on the right will start blinking.
  1. Press the UP or DOWN arrow key to adjust to your desired humidity.
  2. Once the screen defaults back to the temperature and humidity display, check to be sure system is set in auto mode. In auto mode there will be a flame symbol to the top left and a snowflake underneath, as shown in photo.
Contact Support