SS018 - Ductless Split System Wine Cellar Cooling Unit - 60Hz
$6,210.00
The SS018 Ductless Split wine cellar cooling unit is a cutting-edge system versatile enough for either surface-mounting or through-the-wall mounting in small cellars which have no room for mechanical equipment or are unable to accommodate ductwork. SKUs: Basic Fan coil = 99H0292-10; Basic Condensing Unit = 99H0293-11
The SS018 is a 60Hz system, which is standard in the most of North America (incl. USA & Canada). Unit maximum capacity is 2520 BTUH.
Description
The SS018 Ductless Split wine cellar cooling unit is a cutting-edge system versatile enough for either surface-mounting or through-the-wall mounting. It is ideal for small wine cellars which have no room for mechanical equipment or are unable to accommodate ductwork. Always use the wine cellar cooling calculator to determine if the SS018 will be suitable for your wine storage application.
[The SS018 is a 60Hz system, which is standard in the majority of North and South America; if you need a comparable 50Hz system (used in most of Europe, Asia, Africa, & Australia) see the WGS025 wine cellar cooling unit. Verify your country’s line frequency.]
The SS018 wine cellar cooling system comes with a variety of options and accessories. The Low Ambient option protects your wine collection from low (below 40°F to a minimum of 0°F) ambient temperatures. The Electric Heat option is a factory-mounted heater which is available to protect your cellar from getting too cold. Our Serving Temperature option allows wine to be stored at serving temperature (42°F to 64°F) instead of storage temperature. Pairing the SS018 with our freestanding humidifier allows humidity control within the cellar.
Condensing unit is patented. US Patent No. D791295. EU Patent No. 003189349-0001. UK Patent No. 9003189349000.
Additional information
Model | SS018 (TTW) |
---|---|
Line Frequency | 60 Hz |
Capacity | 400 – 2800 BTU |
Volume | 100 – 1200 ft³ |
Length | 13.31" |
Width | 14.25" |
Height | 15.87" |
Weight | 25 lbs |
Electrical | 115/1/60 |
Where to Buy | Distributor |
Documents and Resources
- Ductless Split Datasheet
- Ductless Split Manual (English)
- Ductless Split Quick Start Installation Guide (Multi-Language)
- Ductless Split Specifications Sheet
- Ductless Split CAD Drawing (DWG)
- Ductless Split CAD Drawing (PDF)
- Condenser CAD Drawing (DWG)
- Condenser CAD Drawing (PDF)
Standard Options
Low Ambient Protection
Protects the system from cold temperatures below 5°C (40°F).
Available Options
Extreme Climate Protection Bundle
For Self-Contained Ducted systems: Contains an integral compressor crankcase heater and controls to protect the system against low temperatures (required when inlet air to the condenser coil is below 40°F/5°C). The bundle also contains an integral high capacity condenser fan and coil for operation at elevated ambient temperatures. This bundle should be considered when inlet air to the condenser coil is above 100°F/38°C (condenser air inlet cannot exceed 120°F/49°C).
For Ducted Split systems: Unit protection in extreme climate conditions (on the condenser section only). It is required for continuous operation in climates that fall below 20°F. Enables the system to operate in temperatures as low as -20°F.
Freestanding Humidifier
The Freestanding Humidifier is installed inside your wine space to provide optimal humidity for perfect long-term wine storage. The Humidifier can be controlled by your existing Wine Guardian controller.